MARKING DEVICES BY ETCH-O-MATIC

MARK TOOLS, PARTS, ETC. IN SECONDS!

 MARK ANYTHING METAL — The ETCH-O-MATIC Marking Device will Mark into the surface of Anything made of Metal, including Tools, Instruments, Equipment or Manufactured Parts, anything that can be Typed, Written, Drawn or Photo Processed on a Special Stencil. This includes Names, Numbers, Designs, Logos, Trademarks or even Your Own Signature. Using an Electro-Chemical principle, the New ETCH-O-MATIC Marking Device can Mark as Deep as .003" of an Inch in Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost Instantly. It marks any Flat or Round Metal Surface down to 1/16" Diameter and any Metal Thickness from Thin Foil up to the Largest Castings easily. Most Marks (which look like Printing or Engraving) take about 3 to 20 Seconds (the Longer Dwell Times are for Deep Etching) and are Permanently Etched into the Tool or Manufactured Part.

EASY TO USE!

ETCH-O-MATIC MARKING DEVICES ARE EASY TO USE. Anyone in Your Organization can become an EXPERT in JUST MINUTES and produce Professional Looking Marks Quickly. In Fact, Etch-O-Matic Marking Devices are by Far the Very Easiest Marking Devices to Learn!  Also, You will find that the ETCH-O-MATIC Marking Device is not only the Fastest way to make Permanent Marks on Anything Metal, but is by Far the LEAST EXPENSIVE Marking Device available on the Market Today. Your Marks will Cost just Fractions of a Cent to Produce and You will be Extremely Pleased with the Result.

EASIER THAN LASER MARKING DEVICES

Most Marks will Compare Favorably with Laser Marks on Metal and are Easier and Sometimes Even Faster to Make.  In Fact You have Seen Marks made by Etch-O-Matic Marking Devices hundreds of times before but probably did Not Realize it since the Marks are Used so often in Commerce Today.  If you have ever seen a Feeler Gauge, Drill Bit, Milling Cutter, Saw Blade, Knife Blade, Ball Bearing Race, Carbide Cutter or Thousands of other types of Metal Tools, Parts, Instruments or Equipment then You have probably seen Marks made by Etch-O-Matic Marking Devices.  In fact, we have Marks in a good Percentage of all of the Cars, Trucks, Commercial and Military Aircraft, Submarines, Hospital Surgical Instruments and Implant Devices and we even have Marks in the Nose Cone of the Space Shuttle.  (Yes, NASA called and said that they used an Etch-O-Matic to Mark an Inspection Date and Number in the Nose Cone of the Space Shuttles.)

BASICALLY, THE ETCH-O-MATIC Line of Marking Devices have been Proven Over and Over again during our 36 Years in Business as the Best and Least Expensive Way to Permanently Mark Anything Metal.