ETCH-O-MATIC
MARKING MACHINE
FOR
MARKING METAL TOOLS, PARTS, INSTRUMENTS AND
EQUIPMENT WITH YOUR NAMES, NUMBERS, DESIGNS OR TRADEMARKS IN SECONDS
FOR JUST PENNIES.

Free StencilsWould You Like To TRY Our Universal Stencils - Absolutely FREE? Just Click The Shopping Cart Link Below & Let Us Know Your Shipping Information.
It's Just That Simple!

Here Are Marks Made By The ETCH-O-MATIC MARKING MACHINE
That You Can Easily Do In Your Own Shop In Just Seconds!
Now All You Do Is Create Your Own Design, Logo, Brand Name
Or Trademark And Then Put It On Your Tools, Parts Or Equipment
For Less Than A Cent Per Mark.  It Is Easy, Quick, Inexpensive And Professional!....And YOU Can Do It!
 

 Trademarks

Mark Tools & Gauges

Deep Etch Mark

Black Mark In Seconds

Black On 1/4" Drill Bit (Round Surface)

Deep Etch Mark 

 

HERE IS HOW TO MARK ANYTHING METAL
 Using Dura-Film Stencils And 
The Etch-O-Matic Metal Marking Machine.


Here Is The Quick, Easy And Inexpensive Way To Mark Your Tools, Parts Or Even A Knife.

First Make Your Artwork On Your Computer With Our New Ultra Violet Stencil Makers Shown Below.  When Finished It Should Look Like This One. Or You Can Use Our Regular
 Die Impressed Stencils Which Are Included In Every Kit By Simply Typing On Them.

When Ready Wet The Head Of The Etch-O-Matic With Electrolyte And
Place It On The Stencil.  After Everything Is Lined Up Correctly Just 
Touch The Blade With The Ground Wire (Shown With Alligator Clip)
For A Few Seconds And Your Mark Is Complete.

When Ready Wet The Head Of The Etch-O-Matic With Electrolyte And Place It On The Stencil.  After Everything Is Lined Up Correctly Just Touch The Blade With The Ground Wire
(Shown With Alligator Clip) For A Few Seconds And Your Mark Is Complete.

Here Is Your Mark.  It Is Black On Stainless Steel But You Can Also Make
Deep Etch Marks Down To About .003" And They Can Be "Clear" Or Black

Now You Can See Just How Easy It Is To Put Your Own Mark On
Anything Metal Including Tools, Parts, Instruments Or Even Knives.

HERE IS HOW THE ETCH-O-MATIC MARKING MACHINE WORKS:

REGULAR MARKING

MARKING WITH GROUND PLATE — Simply Lay the Tool or Part on the Ground Plate and Touch ETCH-O-MATIC to it for a Few Brief Seconds and Your Mark is Permanently Etched Into the Surface.

ROUND SURFACES

MARKING ROUND SURFACES — Drill Bits, Milling Cutters, Tubing, Pipe or nearly anything Round can be Easily Marked by "Rolling"  the Mark on as Shown Above.

DEEP ETCH MARKING

MAKES DEEP ETCH MARKS ETCH-O- MATIC Marks many Metals as Deep as .003" with Deep Etch Adapter Clip, a Mark that can only be Removed by Grinding a Major Part of the Surface Away.

 

      If it is Made of Metal
         ETCH-O-MATIC
    MARKING MACHINE       
    Can Mark It And Even
               Put Your
          TRADEMARK
    On It In Just Seconds!

 


eom
THE ETCH-O-MATIC MARKING MACHINE PERMANENTLY MARKS
ANYTHING METAL...IN SECONDS!
ETCHES MARK INTO SURFACE — ETCH-O-MATIC will Etch into the surface of Anything made of Metal, including Tools, Instruments, Equipment or Manufactured Parts, anything that can be Typed, Written, Drawn or Photo Processed on a Special Stencil. This includes Names, Numbers, Designs, Logos, Trademarks or even Your Own Signature. Using an Electro- Chemical principle, the New ETCH-O-MATIC can Etch as Deep as .003" of an Inch in Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost Instantly. It marks any Flat or Round Metal Surface down to 1/16" Diameter and any Metal Thickness from Thin Foil up to the Largest Castings easily. Most Marks (which look like Printing or Engraving) take about 3 to 20 Seconds (the Longer Dwell Times are for Deep Etching) and are Permanently Etched into the Tool or Manufactured Part.

FAST AND VERY EASY TO USE!

ETCH-O-MATIC is FAST and EASY TO USE. Anyone in Your Organization can become an EXPERT in JUST MINUTES and produce Professional Looking Marks Quickly. In Fact, Etch-O-Matic is by Far the Very Easiest Marking System to Learn that is Available Today!  Also, You will find that ETCH-O-MATIC is not only the Fastest way to make Permanent Marks on Anything Metal, but is by Far the LEAST EXPENSIVE method on the Market Today. Your Marks will Cost just Fractions of a Cent to Produce and You will be Extremely Pleased with the Result.

                               COMPARES WITH LASER MARKS

Most Marks will Compare Favorably with Laser Marks on Metal and are Easier and Sometimes Even Faster to Make.  In Fact You have Seen Marks made by Etch-O-Matic hundreds of times before but probably did Not Realize it since the Marks are Used so often in Commerce Today.  If you have ever seen a Feeler Gauge, Drill Bit, Milling Cutter, Saw Blade, Knife Blade, Ball Bearing Race, Carbide Cutter or Thousands of other types of Metal Tools, Parts, Instruments or Equipment then You have probably seen Marks made by Etch-O-Matic.  In fact, we have Marks in a good Percentage of all of the Cars, Trucks, Commercial and Military Aircraft, Submarines, Hospital Surgical Instruments and Implant Devices and we even have Marks in the Nose Cone of the Space Shuttle.  (Yes, NASA called and said that they used an Etch-O-Matic to Mark an Inspection Date and Number in the Nose Cone of the Space Shuttles.)

BASICALLY, THE ETCH-O-MATIC MARKING MACHINE has been Proven Over and Over again during our 36 Years in Business as the Best Way to Permanently Mark Anything Metal.  

         


Here Are The Most Popular Etch-O-Matic Kits That Are
Combined With The New STENCIL-MAKERS For
SPECIAL COMBO OFFERS YOU MUST SEE!

With Prices Starting As Low As $79.95
There Is Nothing Available Anywhere At Prices Like This!

Click Below To See The Complete Etch-O-Matic Line
Of Marking Machines (On Special Today) And All Our Popular Kits
Along With TODAY'S SPECIAL PRICES!

Learn More About the Etch-O-Matic

CLICK HERE FOR MAIN PAGE!


To Contact Us Just Call: 800-775-0797 During Pacific Coast
 Time
From 8:00 A.M. To 4:30 P.M. And A Real Person Will Talk With You
And Explain Anything You Want To Know. 
Email Us 
Or FAX At 1-360-985-2996

P.O. Box 200 / 500 Wilcox Road
Salkum, WA 98582
Email - Click Here
Phone: 1.800.775.0797
Fax: 1.360.985.2996

Visit Our Home Page At:
www.etch-o-matic.com