Mark Tools.

TOOL MARKING
OR
(MARKING TOOLS)

NOW YOU CAN PERMANENTLY MARK METAL TOOLS,
 METAL PARTS, INSTRUMENTS OR EQUIPMENT WITH
NAMES, DESIGNS OR TRADEMARKS IN YOUR SHOP
IN JUST SECONDS FOR PENNIES!

Free StencilsWould You Like To TRY Our Universal Stencils - Absolutely FREE? Just Click The Shopping Cart Link Below & Let Us Know Your Shipping Information.
It's Just That Simple!


Tool Marking With the Etch-o-matic.        Marking Tools in Seconds.

Here Are Examples Of Electro-Chemical Tool Marking Marking That You Can Easily Do In
 Your Own Shop In Just Seconds!  Now All You Do Is Create Your Own Design,
 Logo, Trademark Or Brand Name And Then Put It On Your Tools or Parts For Less
 Than A Cent Per Mark.  It Is Easy, Quick, Cheap And Professional!

You Do This By Using The ETCH-O-MATIC And Our New Mark 440 Dura-Film
Stencil Maker
(As Shown Below) To Create Your Own Trademark Stencils
 In Less Than 5 Minutes!  Simply Follow The Page On Down And See The
 Whole Process Explained In Detail.  Here Are A Few Examples To Show
You What The Marks Look Like.

Make Black Marks on Tools.      Mark Tools in 3 Seconds!    Deep Etch Tool Marking.
Permanently Marking Tools
            Black Mark In 3 Seconds         Deep Etch Your Tools

 Create Any Design, Trademark Or Brand Name And Mark Tools In Seconds!

1/4" Drill Bit Marked.     Marks Stainless Steel Easily.       Marking Woodworking Tools
      
1/4" Drill Bit Marked             Marks Stainless Steel Easily   Woodworking Tools

Scroll Down To See How The Etch-O-Matic Tool Marking Kit
Works And Then Check Out The Great
SPECIAL OFFERS AT THE BOTTOM!

Click Here to Go To NEW IMPROVED HOME PAGE


GROUND PLATE MARKING
Mark With a Ground Plate
MARKING WITH GROUND PLATE — Simply Lay the Tool or Part on the Ground Plate and Touch ETCH-O-MATIC to it for a Few Brief Seconds and Your Mark is Permanently Etched Into the Surface.

ROUND SURFACE MARKING
Mark Round Surfaces
MARKING ROUND SURFACES — Drill Bits, Milling Cutters, Tubing, Pipe or nearly anything Round can be Easily Marked by "Rolling"  the Mark on as Shown Above.

MAKE DEEP ETCH MARKS
Make Deep Etch Marks
MAKES DEEP ETCH MARKSETCH-O- MATIC Marks many Metals as Deep as .003" with Deep Etch Adapter Clip, a Mark that can only be Removed by Grinding a Major Part of the Surface Away.

      If it is Made of Metal
        ETCH-O-MATIC
    Can Mark It And Even
               Put Your
          TRADEMARK
    On It In Just Seconds!

Etch-O-Matic

ETCH-O-MATIC TOOL MARKING IN SECONDS...


MARK METAL SURFACES — ETCH-O-MATIC will Etch into the surface of Anything made of Metal, including Tools, Instruments, Equipment or Manufactured Parts, anything that can be Typed, Written, Drawn or Photo Processed on a Special Stencil. This includes Names, Numbers, Designs, Logos, Trademarks or even Your Own Signature. Using an Electro- Chemical principle, the New ETCH-O-MATIC can Etch as Deep as .003" of an Inch in Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost Instantly. It marks any Flat or Round Metal Surface down to 1/16" Diameter and any Metal Thickness from Thin Foil up to the Largest Castings easily. Most Marks (which look like Printing or Engraving) take about 3 to 20 Seconds (the Longer Dwell Times are for Deep Etching) and are Permanently Etched into the Tool or Manufactured Part.

FAST AND VERY EASY TO USE!

ETCH-O-MATIC is FAST and EASY TO USE. Anyone in Your Organization can become an EXPERT in JUST MINUTES and produce Professional Looking Marks Quickly. In Fact, Etch-O-Matic is by Far the Very Easiest Marking System to Learn that is Available Today!  Also, You will find that ETCH-O-MATIC is not only the Fastest way to make Permanent Marks on Anything Metal, but is by Far the LEAST EXPENSIVE method on the Market Today. Your Marks will Cost just Fractions of a Cent to Produce and You will be Extremely Pleased with the Result.

COMPARES WITH LASER MARKS

Most Marks will Compare Favorably with Laser Marks on Metal and are Easier and Sometimes Even Faster to Make.  In Fact You have Seen Marks made by Etch-O-Matic hundreds of times before but probably did Not Realize it since the Marks are Used so often in Commerce Today.  If you have ever seen a Feeler Gauge, Drill Bit, Milling Cutter, Saw Blade, Knife Blade, Ball Bearing Race, Carbide Cutter or Thousands of other types of Metal Tools, Parts, Instruments or Equipment then You have probably seen Marks made by Etch-O-Matic.  In fact, we have Marks in a good Percentage of all of the Cars, Trucks, Commercial and Military Aircraft, Submarines, Hospital Surgical Instruments and Implant Devices and we even have Marks in the Nose Cone of the Space Shuttle.  (Yes, NASA called and said that they used an Etch-O-Matic to Mark an Inspection Date and Number in the Nose Cone of the Space Shuttles.)

BASICALLY, THE ETCH-O-MATIC TOOL MARKING SYSTEM has been Proven Over and Over again during our 36 Years in Business as the Best and Least Expensive Way of Permanently Marking Tools.


EXAMPLES OF ETCH-O-MATIC MARKS

ETCH-O-MATIC MAKES FOUR KINDS OF MARKS

              


HERE IS TOOL MARKING IN SECONDS:

 Here Is The Quick, Easy And Inexpensive Way To Mark Your Tools Or Parts.
First Make Your Artwork On Your Computer And Make A Stencil As Shown
Below.  When Finished It Should Look Like This One.

Next Place The Stencil On Your Tool, Part or Knife Blade And Use A Small Piece Of
Scotch Tape To Hold It In Position. 

When Ready Wet The Head Of The Etch-O-Matic With Electrolyte And
Place It On The Stencil.  After Everything Is Lined Up Correctly Just
Touch The Blade With The Ground Wire (Shown With Alligator Clip)
For A Few Seconds And Your Mark Is Complete.

Here Is Your Mark.  It Is Black On Stainless Steel But You Can Also Make
Deep Etch Marks Down To About .003" And They Can Be "Clear" Or Black.

Now You Can See Just How Easy It Is To Put Your Own Mark On
Your Knives...Or Even Personalize Them For Your Customers.


TYPEWRITER STENCILS

Now Let's Talk About Stencils.  You Have Several Options.  In Each
Etch-O-Matic Kit There Is A Package Of Stencils.  The Ones That Come
In Each Kit Are Called "Die Impressed" Which Simply Means They Are
Prepared By Using A Typewriter Or Dot Matrix Printer Like The Sample
Shown Below.  This Is Quick, Easy And Cheap As You Can Do It Yourself
If You Have A Typewriter In Just Minutes.  The Marks Made By This System
Will Look Just Like You "Typed" In Black Letters On Your Knife.  If That Is
Good Enough For You Then Go This Route.  Otherwise You Can Make Your
Own Dura-Film Stencils As Shown Below Or Even Send Us Your Artwork And
We Will Make Them For You.  Contact Us By email, Fax or Phone For This.

Sample Of Die Impressed Stencil That Comes In Each Kit Shown Above.
We Have Typed "SAMPLE MARK" To Show You How It Would Look.


HERE IS HOW TO MAKE YOUR OWN
DURA-FILM STENCILS
IN MINUTES IN YOUR OWN SHOP
Now You Can Make Your Own Dura-Film Stencils In About 3 Minutes.
(NOTE: We Are Using Large Type So It Will Photograph Easily.)

First Make Your Copy On Your Computer.  Here Is A Simple A B C Made Large
To Show In The Photo.  You Can Make Any Line Drawing,  Logo, Trademark
 or Simple Message You Wish.  There Is Not Much Limit Except Photo's Are
Difficult And Very Thin Lines Are Hard To Mark.

Next Print Out Your Copy On A Transparency (Which Comes In The Kit)
And Place The Transparency Copy On A Piece Of Unexposed Dura-Film
Stencil (Which Comes In The Kit) And Finally Place A Glass Plate On Top.

Next Place Tray In The 440 Dura-Film Stencil Maker And Turn On Exposure
Unit For About 3 Minutes.

Next Remove Stencil And Develop For 30 Seconds To A Minute.
Stencil Is Then Ready To Use To Mark Your Tools, Parts, Knives Or Anything Metal.

Here We Are Marking A Saw Blade Since It Is Large Enough To Make A Good
Photo.  You Simply Lay The Stencil On The Blade, Wet The Etch-O-Matic Pad
(On Bottom) With Electrolyte, Then Place The Etch-O-Matic On The Stencil, Ground
For A Few Seconds And Then Remove And Your Blade Is Permanently Marked.


HERE ARE THREE TOOL MARKING KITS
THAT ARE ON SPECIAL
WITH THE 440 COMBO KITS LISTED BELOW!

ETCH-O-MATIC STARTER KIT

Lowest Priced Kit available Anywhere, Yet it Does the Job in Industry, in Plants, Machine Shops and Everywhere Tool Marking is needed.  The Marker Unit is 10 volts, 2 amps and is Excellent for Light Duty Marking of Tools and Parts.  (Transformer is inside marker unit)

KIT CONTAINS:
ETCH-O-MATIC marker with standard head marking size 7/8" x 13/4", electrical cord, ground plate, 2 oz. Electrolyte solution in plastic bottle, 10 special stencils, neutralizer, deep etching adapter clip and complete instructions. Each kit will make approximately 1,000 marks before refill supplies are needed.

Only $79.95 complete!  Order Now!

SUPER ETCH-O-MATIC KIT
HEAVY DUTY... INDUSTRIAL QUALITY
BEST VALUE ON THE MARKET TODAY!

NEW SUPER ETCH-O-MATIC is a Powerful, 15-Volt, 10-Amp, Heavy Duty, Industrial Quality Marking System that can Stand Up to Continuous Duty, Production Line Marking. It can make Fast A.C. Marks, then Change Instantly to Deep Etch Marking Down to .003" Deep. It can make Large Marks 2" x 4" or Larger for Trademarks or Etch Hard-to-Mark Coatings like Black Oxide Quickly. This is a Solid, "No Frills" Etcher that is Priced $200 to $300 BELOW Similar Kits on the Market Today.

KIT CONTAINS:
1 - 15-volt, 10-amp. marker unit with external transformer; adapter clip for deep etch marking; ground plate; 8-oz. general purpose electrolyte; 8-oz. neutralizer; extra pads; 100 pak special stencils; complete instructions and packed in sturdy plastic carrying case.

Only $229.95 complete.  Order Now!

SUPER INDUSTRIAL KIT
$400.00 VALUE — SAVE $120.00!

THE NEW SUPER ETCH-O-MATIC INDUSTRIAL KIT Combines the Best of Both of the TWO Kits Above and gives You enough Supplies to Mark Almost Any Type of Metal in the Average Plant. It also provides Great Value Because You get the Starter Kit 10-volt / 2-amp Unit Included FREE in the Kit.   Also Included is a Large 2" x 4" Grid that Allows You to Mark Much Larger Areas at the Same Time.   THIS IS REALLY A SUPER VALUE AT THIS LOW PRICE!

KIT CONTAINS: 1 Super and 1 Regular ETCH-O-MATIC marker along with an adapter clip for deep etch marking, ground plate, 8 oz general purpose and stainless steel electrolyte, two (2) 100 paks stencils, 4 oz. of aluminum, black oxide, and brass, copper & bronze electrolyte, 1 large 2" x 4" grid with stencils and pads to fit, 8 oz. neutralizer, 2 neutralizer powder paks, 1 extra regular grid and complete instructions.

Only $329.95 complete.  Order Now!

HERE ARE THE NEW DURA-FILM STENCIL MAKERS!

MARK 440 UV STENCIL MAKER KIT
MULTI-PURPOSE UV EXPOSURE UNIT
(Heavy Duty Industrial Unit)

Mark 440 Stencil Maker

Mark 440 UV Unit

Complete kit contains:
1   U.V. Aluminum Exposure Unit  5"x 6"x 12" With
    1,000 Hour Ultra Violet 160 Watt Bulb.
1   Aluminum Exposure Tray With Compression Foam.
2   Large Compression Clamps For Above.
1   16 Oz. Bottle Stencil Developer.
1   Developing tray w/lid
4   White Developer Sponges.
1   Digital Timer.
10 Dura-Film Unexposed Stencils 4"x 4". 
2
   FREE Samples Of Dura-Film Stencils FOR PRACTICE.
5   Sheets Transparency Film (8 1/2"x 11")
1  Set Complete Instructions.  

MARK 440 COMBO KITS
MULTI-PURPOSE UV EXPOSURE UNITS
(Heavy Duty Industrial Unit)

Mark 440 Stencil Maker Combo

Order A Combo Kit Now

Complete kit contains:
440 Combo Kits Contain All the Items Listed Above Plus:
A COMPLETE ETCH-O-MATIC STARTER KIT.
Combo Price: $229.95

440 SUPER COMBO KIT HAS A SUPER ETCH-O-MATIC (WITHOUT PLASTIC CASE).
Combo Price: $349.95

440 SUPER INDUSTRIAL COMBO KIT HAS AN SUPER INDUSTRIAL ETCH-O-MATIC (W/O PLASTIC CASE).
Combo Price: $399.95

 

MARK 560 COMBO KITS
MULTI-PURPOSE UV EXPOSURE UNITS
(Heavy Duty Industrial Unit)

Mark 560 Stencil Maker

Mark 560 UV Unit

Complete kit contains:
1  UV Exposure Unit measuring 5"x 6"x 12" high with a
1000 Hour  Special UV Bulb, cord & switch.
1  Exposure tray with glass top
2  large Clamps
1  16 oz Stencil Developer
1  8"x 10" Developing & Curing Tray
4  White Sponges
1  Digital Timer
10  Dura-Film Unexposed Stencils ( 5"x 6")
2"x 2" Free Sample TEST Stencils (for practice)
5  Sheets of Transparency Film
1 Set Complete Instructions.

 MARK 680 COMBO KITS
MULTI-PURPOSE UV EXPOSURE UNITS
(Heavy Duty Industrial Unit)

Mark 680 Stencil Maker

Mark 680 UV Unit

Complete kit contains:
1  UV Exposure Unit measuring 6"x 8"x 12" high with a
1000 Hour Special UV Bulb, cord & switch.
1  Exposure tray with glass top
2  large Clamps
1  16 oz Stencil Developer
1  8"x 10" Developing & Curing Tray
4  White Sponges
1  Digital Timer
10  Dura-Film Unexposed Stencils ( 6"x 8")
 2"x 2" Free Sample TEST Stencils (for practice) 
 5  Sheets of Transparency Film
 1 Set Complete Instructions.

TODAY'S SPECIALS!
        Here Are Even BETTER Deals!
SPECIALS PAGE!


Maybe You Need A Few More Ideas On Ways To Use And MAKE MONEY With The Etch-O-Matic Kit.

  • We Have Been In Business Over 36 Years And Have Sold Over 500,000 Etch-O-Matic Kits.

  • We Have Sold Kits To Most Of The Largest & Smallest Companies In The U.S.A (See Below)

  • The Etch-O-Matic Marks Almost Anything Metal Including Tools, Parts, Instruments, And Equipment.

  • The Tool Marking Feature Gives You Hundreds Of Opportunities To Make Money Or Help Others.

  • You Can Sell Stencils To  Knife Makers...Simply Set Up At Knife Shows With Samples.

  • Here Is A Money Saving Idea:  Buy One Of These Units With Other Knife Makers And Share.

  • Maybe You Are A Part Of A Knife Maker Club And Everyone Can Chip In.  Not Expensive That Way.

  • Also Every Auto Mechanic Needs His Tools Marked.  Find A Few Of These Guys And Buy Together.

  • If You Have Any Small Mfg. Plant Making Metal Products You Can Make Them A Deal On Marking.

  • All Hospitals, HMO's, Doctor's Clinics Need Their Instruments Marked.  You Can Do It & Charge Them.

  • There Is A Large Market For Metal Labels, Tags, Signs, Decals And Nameplates And You Can Do It.

  • Here Are Just A Few Ideas You Can Use To Make Money Or Cut Your Costs.  There Are Many More.


BECOME AN AFFILIATE

Buy The 440 Stencil Maker Or One Of The Two Combo Kits Above At The
Low Discounted Introductory Prices Listed.  Try It.  Use It.  Get To Know
It...So You Can SELL IT And Honestly Recommend It To Your Friends,
Customers, Club Members, etc.  We Will Then Make You An Affiliate/DEALER And
Give You A Full 25% Discount On Anything You Buy Or Sell Including Even
The Low Priced Introductory Deals Or Supplies For Your Own Use.   And You
 Can Sign Up Others As AFFILIATES/DEALERS And You Get A 10% Commission
On Their Sales (While They Get A 25% Discount). 

You Will Be A Full Affiliate/Dealer (But You Do NOT Have To Stock Anything) And Can
Sell Or Buy Anything In The Etch-O-Matic Line At Your 25% Discount.  Here Is
Something You Can Sell Anywhere Or
Even Put A Link On Your Website
And We Will Assign You An Affiliate/Dealer Number And When Someone "Clicks" To Our
Website From Yours That Person Will Remain Your Customer And You Make
25% On All Sales To Them.  Simply Tell Us You Want To Be An Affiliate/Dealer When You
Make Your First Purchase.  We Will Handle The Rest.

 This Is A Short Time Offer To Help The Introduction Of The New 440 Stencil Maker
  Get Started.  Everyone Can
Not Become A Affiliate/Dealer.  So It Is First Come
And First Served.  Here Is Your Chance To Get In On The Ground Floor, 
Get An Excellent New Marking System And Make Some Money
In The Bargain.  Don't Miss It.  This Really Is NOT Going To Last Long.

TO BECOME AN AFFILIATE/DEALER CLICK HERE!

Call, FAX or email Us Today And Let's Get Started!

 


Why Not Bookmark This Page Before You Lose It?  These Deals Won't Last Long.

P.O. Box 200 / 500 Wilcox Road
Salkum, WA 98582
Email - Click Here
Phone: 1.800.775.0797
Fax: 1.360.985.2996

Visit Our Tool Marking Page at Etch-O-Matic.com